不同警告方式下驾驶人应激反应能力模拟试验研究

为研究在道路突发危险场景下先进驾驶辅助系统的不同警告方式对驾驶人应激反应能力的影响，利用自主开发的驾驶人应激反应能力测试软件，以计算机模拟与驾驶模拟器为试验平台，以实际驾驶视频为试验场景，选取操作准确率和反应时间为测试指标，分析不同警告方式下驾驶人的应激反应能力。研究结果表明:视觉警告可有效缩短应激反应时间；视听觉组合警告中，视觉警告占主导作用，听觉警告起辅助作用；在真实场景视频试验环境下，驾驶模拟器模拟试验的操作效果优于计算机模拟试验。     

氨气敏电极法和纳氏试剂分光光度法对地表水中氨氮的比对测试

采用不同质量浓度的氨氮标准样品和实际样品,用氨气敏电极法和纳氏试剂分光光度法进行同步测试。结果表明,2种分析方法在水样氨氮质量浓度在0. 159～2. 81 mg/L范围内具有良好的可比性、精密性和准确性。氨气敏电极法的检出限为0. 03 mg/L,平行6次测定样品的相对标准偏差为0. 4%～4. 2%,加标回收率为85. 0%～110%;纳氏试剂分光光度法的检出限为0. 025 mg/L,平行6次测定样品的相对标准偏差为0. 5%～6. 4%,加标回收率为93. 0%～99. 8%。同时氨气敏电极法在样品预处理、试剂配制和分析时间上要优于纳氏试剂分光光度法。氨气敏电极法能够满足地表水自动监测在线比对实际工作的需求,该方法具有良好的适用性。     

TiO2气溶胶快速去除空气中的芥子气模拟剂

在自制反应器内,通过喷射法将纳米TiO_2分散成气溶胶形式,用以降解空气中的芥子气模拟剂二乙基硫醚(DES)。利用自行设计的一套气溶胶沉降行为评价装置,对TiO_2气溶胶的释放条件进行了优化。系统研究了相对湿度、反应温度、光强、催化剂加入量、反应物浓度等因素对DES降解速率和彻底矿化速率的影响。结果表明:TiO_2气溶胶对2.80 mg/L(近似芥子气快速致死浓度)DES降解的半衰期由涂覆型TiO_2的34.5 min缩短至8.5 min;TiO_2气溶胶光催化降解DES的最佳相对湿度为35%,此时CO_2最快生成速率可达34.64μg/(L·min),150 min内彻底矿化比例达66.1%;对于1.5 L反应器,催化剂加入量为30 mg时降解DES的量效比达到最佳状态;TiO_2气溶胶光催化适用于含低浓度DES空气的快速净化。     

半干法脱除球团烟气中的SO2及Hg0

采用钙基吸收剂及复合氧化剂半干法脱除模拟球团烟气中的SO_2及Hg~0,考察了多因素条件对吸收效果的影响。实验结果表明,在以NaClO和NaClO_2为复合氧化剂、 NaClO与NaClO_2体积比1∶0.5、复合氧化剂质量分数3%、反应温度110℃、钙基吸收剂质量3.0 g、模拟烟气进气流量1.2 L/min的条件下,SO_2和Hg~0的脱除率分别为98%和93%,证明钙基吸收剂与复合氧化剂对污染物球团烟气中的SO_2和Hg~0有良好的脱除作用。     

One-step estimation method and nomogram to predict safety distances of pressurized gas pipelines from blast sources

Pressurized gas pipelines may be endangered by accidental or intentional activities causing excess ground vibrations leading to failure. Thus, many papers have been published on this issue, yet most of these efforts suffer from complexity and inability to ascertain that all engaged factors are taken into account. These factors are attributed, namely, to explosion source, explosion-ground interaction, energy transfer through the ground, ground-pipeline interaction, and response of the pipeline. The deterministic method developed previously by the author has derived useful prediction mathematical formulas that can be used to calculate, either the stand-off distance of purposefully used explosives, or the maximum quantity of explosives to be used at a given distance, or the equivalent stress of a pipeline induced by an explosive charge at a given standoff distance. The method can also be applied to accidental blast events in factories or other activities. Yet, the complex formulas developed are hard to be used in the field and a simpler approach is needed to facilitate and accelerate in-field estimations. Thus, a nomogram was prepared to make the safety estimations easy and fast and taking into account all engaged critical factors starting from the explosion source through the integrity of the structure.     

Evaluation of driver performance with a prototype cyber physical mid-block crossing advanced warning system

Introduction: Using connected vehicle technologies, pedestrian to vehicle (P2V) communication applications can be installed on smart devices allowing pedestrians to communicate with drivers by broadcasting discrete safety messages, received by drivers in-vehicle, as an alternative to expensive fixed-location physical safety infrastructure. Method: This study consists of designing, developing, and deploying an entirely cyber-physical P2V communication system within the cellular vehicle to everything (C-V2X) environment at a mid-block crosswalk to analyze drivers’ reactions to in-vehicle advanced warning messages, the impacts of the advanced warning messages on driver awareness, and drivers’ acceptance of this technology. Results: In testing human subjects with, and without, advanced warning messages upon approaching a mid-block crosswalk, driver reaction, acceptance, speed, eye tracking data, and demographic data were collected. Through an odds ratio comparison, it was found that drivers were at least 2.44 times more likely to stop for the pedestrian with the warning than without during the day, and at least 1.79 times more likely during the night. Furthermore, through binary logistic regression analysis, it was found that driver age, time of the day, and the presence of the advanced warning message all had strong, significant impacts with a confidence value of at least 98% (p < 0.02) on the rate at which drivers stopped for the pedestrian. Conclusions: The results from this study indicate that the advanced warning message sent within the C-V2X had a strong, positive impact on driver behavior and understanding of pedestrian intent. Practical Applications: Pedestrian crashes and fatality rates at mid-block crossings continue to increase over the years. Connected vehicle technology utilizing smart devices can be used as a means for communications between pedestrians and drivers to deliver safety messages. State and local city planners should consider geofencing designated mid-block crossings at which this technology operates to increase pedestrian safety and driver awareness.     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

面向突发事件智能建筑管理系统的集成结构

为了实现面向突发事件的智能建筑管理系统(IBMS),提出了智能建筑突发事件的抽象模型、基本运算操作及优先权分配机制,并根据突发事件监控和管理的目标,提出了IBMS的"分布式虚拟应急中心"集成结构.     

高速公路汽车追尾预警系统的开发研究

对高速公路汽车追尾预警系统进行了总体设计,把系统划分为主控单元、雷达测距单元、信息采集单元、显示-声光报警单元4个子系统。在分析汽车动力学基础上,提出了系统安全距离模型,并对各子系统进行了软、硬件设计。通过模拟试验和实际装车实验,验证了系统所要求的各种性能,雷达测距准确,系统报警及时有效.     

城市交通与环境可持续发展指标体系评估系统研究——上海案例应用

可持续发展是一种将社会发展概念从单纯经济增长拓展到经济、社会、环境协调发展的城市发展新模式.交通环境的可持续发展在整个发展体系中占据着重要地位.本文针对目前大城市普遍面临的交通环境压力和经济、交通与环境系统的复杂性,通过构建经济-交通-环境间的压力与响应关系,建立了可用于"回顾过去、解析现状、瞻望未来"的城市交通环境可持续发展指标体系.采用隶属函数对单项指标进行标准化处理,对交通环境可持续发展综合指数的评价,采用层次分析法确定各指标的权重.采用Visual Basic 6.0及Office的Access 2000,开发了交通环境可持续发展指标体系评估系统,并以上海市为案例进行了研究.本系统的开发可为城市交通环境可持续状况评价及发展对策的制定提供技术支持.